Ground Handling is defined in Annex 6 - Operations of Aircraft as service necessary for an aircraft's arrival at, and departure from an airport, other than air traffic services. A list of these services is provided in Appendix B of this manual. Annex 14 - Aerodromes, Vol 1 Aerodromes Design and Operations does not specifically refer to ground handling but contains provisions on apron management…
The PANS-AIM is complementary to SARPs contained in Annex 15 and in Annex 4. It is supplemented when necessary by regional procedures contained in the Regional Supplementary Procedures
The PANS Aerodrome specify, in greater detail than SARPs, operational procedure to be apllied by aerodrome operators to ensure aerodrome operational safety. PANS Aerodrome specify procedures to be applied by both aerodrome regulators and operators for initial aerodrome certification and continuing aerodrome safety oversight as well as aerodrome compatibility studies, in particular, where full c…
To improve the situation with respect to runway incursions and to encourage the implementation of relevant provisions, ICA embarked on an education and awareness campaign which began with a comprehensive search for the best available educational material for inclusion in an interactive runway safety toolkit. information on this toolkist is provided in Appendix J to this manual
This manual relate to responsibilities, function and duties of ICAO member state respect to aviation safety oversight in compliance with their obligations as signatories to the convention on Itenational Civil Aviation (The Chicago Convention). It is directed at state authorities and intended as a guide to assist state in establishing and managing an effective ans sustainable state safety oversi…
The Technical Committee TC102 of the International Society for Soil Mechanics and Geotechnical Engineering (ISSMGE) and the Organising Committee of CPT’18 extend a warm welcome to all participants of the 4th International Symposium on Cone Penetration Testing (CPT’18). The symposium is being held at Delft University of Technology, in Delft, The Netherlands, 21–22 June 2018,…
This CAD contains the Standards, requirements and procedures pertaining to the provisions of aerodrome design and operations issued by the CAAM. The Standards and requirements in this CAD are based mainly on the Standards and Recommended Practices (SARPs) contained in the International Civil Aviation Organisation (ICAO) Annex 14 Eight Edition to the Chicago Convention – Aerodrome Design …